The Tardito 4-Nozzle Water Rinsing Station cleans and sanitizes bottles with pneumatic operation. Stainless steel frame, water filter, and no electricity needed.
| Price: | $2,790.00 |
| SKU: | CRTASM-4 |
Product Description
Tardito 4-Nozzle Water Rinsing Station to rinse and clean bottles. Stainless Steel Frame with Water Filter included (rated at .45 microns). Machine is pneumatic and therefore, does not require electricity. Great for small-scale bottling.
OPERATION:
The operator positions the containers, with the mouth pointing downwards, onto the 4 nozzles in the center of the work-table. The spray is released just by hand pressure, in order to clean out all residue. The length of spraying time depends on the time the pressure is maintained. The drain time is decided by the operator. The water pressure is simply created by the compression of the incoming water inside the small rinsing pipe. There are no electrical components.
Other Product Samplings:

Tardito TP10 Semi-Automatic Rinser
(
[ID] => 5720
[post] => WP_Post Object
(
[ID] => 5720
[post_author] => 2
[post_date] => 2023-06-06 16:51:35
[post_date_gmt] => 2023-06-06 16:51:35
[post_content] => Tardito Semi-Automatic Rinsing Machine with manual loading and unloading of bottles, operating with water injection. Machine is designed to rinse inside of bottles before filling them, avoiding water drops on the outside of bottles. Water is filtered with .35UM cartridge filter, supplied with the machine. Rinser is supplied mounted on wheels with braking device. Built with AISI 304 Stainless-Steel.
WORKING CYCLE
Operator places bottle upside down by hand in one of the 10 positions on the central plate of the machine. The plate is turning with step-by-step motion. One rinsing nozzle sprays water into the bottle. The table then rotates so that water drips down, along with any particles to be removed. The water jet is operated by the bottle itself (no bottle – no spraying). It can be adjusted as needed according to different bottles specifications. Dripping time is approximately 10 seconds, which is the time needed for bottle to make a complete turn, where operator can remove it from machine. Rinses approximately 700 BPH.
TECHNICAL SPECIFICATIONS
Output: up to 700 bph
Voltage: 220 V – 1F – 50 Hz ($165 charge to convert to 110V)
Installed Power: 0.25 kw
Water consumption: Approx. 30-40 Lt/h Water Infeed fitting – 1 ¾”
OPTIONS:
Recycling Kit (Tank, Pump, Pipes): Starting at $1,375.00
Second Station for Air/Nitrogen: Starting at $625.00
AISI 316 Stainless-Steel: Starting at $900.00 (Machine is normally built with AISI 304 Stainless Steel)
Additional Change Parts for Bottles: Starting at $650.00*
- Change Parts for additional round bottles are the cups for holding the bottles by the neck. Often, the same cups can be used for different bottles sizes, when the neck size is similar. Most standard bottles (750ml) can be accommodated with the same set of cups. Drawing/Specs can be emailed to us if needed so that we can estimate the number of additional cups which may be needed.
*Machine includes a set (10 pcs) of bottle holding cups on the machine’s rotating plate. Additional cups can be ordered based on bottle changes.
[post_title] => Tardito TP10 Semi-Automatic Rinser
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => tardito-tp10-semi-automatic-rinsing-machine
[to_ping] =>
[pinged] =>
[post_modified] => 2026-07-07 16:09:09
[post_modified_gmt] => 2026-07-07 16:09:09
[post_content_filtered] =>
[post_parent] => 0
[guid] => http://crusystems.com/?post_type=al_product&p=5720
[menu_order] => 0
[post_type] => al_product
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
)
Tardito Semi-Automatic Rinsing Machine with manual loading and unloading of bottles, operating with water injection.
$5,590.00

Tardito 4-Nozzle Manual Rinsing and Sparging Station with Recycling System
(
[ID] => 5711
[post] => WP_Post Object
(
[ID] => 5711
[post_author] => 2
[post_date] => 2023-06-06 16:38:58
[post_date_gmt] => 2023-06-06 16:38:58
[post_content] => Tardito Manual 4-Nozzle Rinsing and Sparging Station with Recycling System comes with 2 Nozzles for spraying a rinsing solution and 2 Nozzles for air. Machine includes a Recycling Pump and a Tank for using sanitizing or an alcohol-based solution.
This Re-Circulating Rinser can recycle liquids in addition to water (such as cleaning agents, spirits, wine, etc.). Machine is used for rinsing bottles when a solution of at least 50% alcohol + water is used with spirits/wine. Machine prevents the residual water from lowering the alcohol volume, particularly in small sized spirits bottles. The product used for the rinsing should be changed after about 8 working hours.
For sparging, the manufacturer suggests using nitrogen or accurately pre-filtered, compressed air due to the contact with product. Non-filtered air may leave traces of contamination elements (i.e., mechanic oil droplets…) inside of bottles.
OPERATION:
The operator positions containers, with mouth pointing downwards, onto the 2 Rinsing Nozzles on top plate of machine. The liquid is emitted by hand pressure, in order to clean out all residue. The spraying time depends on the time the pressure is maintained. The drain time is decided by the operator. The containers are then placed over the 2 Air Nozzles, again with mouth pointing downwards. The machine is equipped with recycling pump and tank for use with sanitizing or an alcohol-based solution.
SPECS:
- Stainless Steel Mainframe
- Hard Plastic Standard Housing
- 220V-1Ph-50 Hz ($165 charge to convert to 110V)
- Filtering unit for water/solution with 0.35 UM Polypropylene Cartridge
- Stainless Steel recycling pump for using sterilizing/alcohol-based solution
- Filtering cartridge for air with nominal filtration rating 0.01um with activated carbon
- No need of change parts
OPTIONAL:
- Stainless Steel Filter Container and Cartridge: Specifically made for rinsing with sterilizing solutions, which can be particularly corrosive. The upgrade makes the container and the cartridge more resistant and extends the duration of these parts.
- ATEX Pump with 220V-monophase-50Hz: $1,495.00 additional. The lead time of 6 weeks from order.
- ATEX Pump with other options (220V-60Hz / 110V-60Hz / 110V-50Hz): $1,545.00 additional.
[post_title] => Tardito 4-Nozzle Manual Rinsing and Sparging Station with Recycling System
[post_excerpt] => The Tardito Manual 4-Nozzle Rinsing & Sparging Station features 2 rinsing nozzles and 2 air nozzles, with a recycling system for sanitizing or alcohol solutions. Ideal for spirits and wine bottles, it ensures effective cleaning without reducing alcohol content.
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => tardito-4-nozzle-manual-rinsing-station-with-recycling-system
[to_ping] =>
[pinged] =>
[post_modified] => 2026-07-07 16:09:45
[post_modified_gmt] => 2026-07-07 16:09:45
[post_content_filtered] =>
[post_parent] => 0
[guid] => http://crusystems.com/?post_type=al_product&p=5711
[menu_order] => 0
[post_type] => al_product
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
)
The Tardito Manual 4-Nozzle Rinsing & Sparging Station features 2 rinsing nozzles and 2 air nozzles, with a recycling system for sanitizing or alcohol solutions. Ideal for spirits and wine bottles, it ensures effective cleaning without reducing alcohol content.
$3,390.00

Tardito 4-Nozzle Manual Rinsing / Sparging Station
(
[ID] => 5501
[post] => WP_Post Object
(
[ID] => 5501
[post_author] => 2
[post_date] => 2023-05-17 21:39:44
[post_date_gmt] => 2023-05-17 21:39:44
[post_content] =>
- 2 Nozzles for Air/Gas: Sparge with filtered compressed air or N2/CO2
- 2 Nozzles for Water Rinsing: Includes water filter rated at .45 microns
- Pneumatic Operation: No electricity required
- Stainless Steel Frame: Durable and corrosion-resistant
- Air Regulator & Filter: Ensures clean air/gas for bottle sparging
Specs:
- Air/Gas Connection: Quick connect for 8mm outer diameter tube
- Water Connection: ¾” Female threaded fitting
- Water Drain Pipe Extension: 20mm diameter
[post_title] => Tardito 4-Nozzle Manual Rinsing / Sparging Station
[post_excerpt] =>
- 2 Nozzles for air/gas (N2 or CO2) sparging
- 2 Nozzles for water rinsing
- Stainless Steel Frame with 0.45-micron water filter
- Air Regulator and Filter for controlled sparging
- Pneumatic operation—no electricity required
- Compatible with filtered compressed air or nitrogen/CO2
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => tardito-4-nozzle-manual-rinsing-sparging-station
[to_ping] =>
[pinged] =>
[post_modified] => 2026-07-07 16:10:24
[post_modified_gmt] => 2026-07-07 16:10:24
[post_content_filtered] =>
[post_parent] => 0
[guid] => http://crusystems.com/?post_type=al_product&p=5501
[menu_order] => 0
[post_type] => al_product
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
)
Tardito 4-Nozzle Rinsing/Sparging Station Cleans, sanitizes, and blows air/gas into bottles. Great for small-scale bottling.
$2,790.00
